Why is my Konica Minolta bizhub C25 having duplex misfeeds?
If your Konica Minolta All in One Printer is misfeeding during duplex printing, it might be due to unsupported media. Ensure you are using KONICA MINOLTA-approved media. Also, double-check the media path inside the duplex unit to ensure all misfed media has been removed.
What to do if the media misfeed message stays on for Konica Minolta bizhub C25?
If the 'Media misfeed' message persists on your Konica Minolta All in One Printer, it could be due to two reasons. First, try opening and closing the front cover again to reset the machine. Second, ensure that all misfed media has been removed from the media path.
Why is my Konica Minolta bizhub C25 misfeeding media?
If your Konica Minolta All in One Printer displays a 'Media is misfeeding' message, there are several potential causes. First, ensure the media is correctly positioned in the tray. If the tray is overfilled, remove the excess media to match the allowed amount. Check if the media guides are properly adjusted to the media size. Avoid using warped or wrinkled media; smooth it out or replace it. Also, ensure you're using the correct tray for the media type. Envelopes should only be loaded in Tray 1, and special media like labels or postcards should be in Tray 1 or 2. If you're using custom-sized media, load it into Tray 1 or 2.
General| Print Technology | Laser |
|---|---|
| Scan Resolution | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Duplex Printing | Yes |
| Connectivity | USB 2.0, Ethernet |
| Functions | Print, Copy, Scan |
| Maximum Paper Size | A4 |
| Print Speed | 25 ppm |
| Copy Speed | Up to 25 ppm (color/black) |
| Paper Size | A6, A5, A4, B5 |
| Interface | USB 2.0 |
| Operating System Compatibility | Windows, Mac |
To Next Page