Name: Konica Minolta bizhub C258
Brand: Konica Minolta
Rating: 4 (1 reviews)

To Next Page

To Previous Page

bizhub C658/C558/C458/C368/C308/C258 5-21

5.3 Fax

Frequently Asked Questions Chapter 5

4 Select a number, then select [New].

5 Enter the sender name, then tap [OK].

6 Repeat Steps 4 and 5 to complete entry of all sender names.

% You can register up to 20 sender names.

% To edit a registered sender name, select a sender name and tap [Edit], change the sender name and

tap [OK].

% To delete a registered sender name, select the sender name and tap [Delete], select [Yes], then tap

[OK].

% To set the default sender name, select a sender name and tap [Set as Default].

Tips

- If [Administrator Settings] - [Fax Settings] - [TX/RX Settings] - [Individual Sender Line Setup] is set to

[ON] while multiple lines are used, the default sender name can be specified for each line.

How to set: Selecting a sender name upon fax transmission

1 Load the original.

2 Tap [Scan/Fax] and select a destination.

3 Tap [Application] and select [Fax Header Settings].

4 Select a sender name to print on the fax and tap [OK].

5 Press the Start key to start fax transmission.

Other manuals for Konica Minolta bizhub C258

Questions and Answers:

Need help?

Do you have a question about the Konica Minolta bizhub C258 and is the answer not in the manual?

General