3
Basic copy operations
3-10 C300
Basic copy operations Chapter 3
3 Align the original with
the mark in the back-
left corner of the original
scales.
– For details on select-
ing the original orien-
tation, refer to
“Selecting the origi-
nal orientation (Origi-
nal Direction
settings)” on
page 3-22.
– For details on select-
ing the position of the binding margin, refer “Selecting the position
of the binding margin (Margin settings)” on page 3-24.
– For transparent or
translucent originals,
place a blank sheet
of paper of the same
size as the original
over the original.
– For bound originals
spread over two fac-
ing pages, such as a
book or magazine,
position the top of
the original toward
the back of this ma-
chine and align the
original with the
mark in the back-
left corner of the
original scales, as
shown.
4 Close the original cover, or the ADF if it is installed.
Original scales
Blank sheet
of paper