Copy paper/originals
7
C300 7-11
Copy paper/originals Chapter 7
To specify a paper size (Set Size settings)
The paper size for the tray 1 and the bypass tray can be set so that the paper
tray can be used with the specified paper size.
This is useful, for example, when the size of the paper that is loaded cannot
be automatically detected (such as with postcards or paper in inch sizes).
The following procedure describes how to specify the 4 × 6 w setting for the
tray 1.
1 In the Basic screen, touch [Paper].
The Paper screen appears.
2 Touch the button for the tray 1.
– To set the paper size for the bypass tray, touch the button for the
bypass tray.
3 Touch [Change Tray Settings].
To Next Page
Loading...
Need help?
General
