4
Additional copy operations
4-34 C300
Additional copy operations Chapter 4
3 Touch the four check points ( ), making sure that a sound is pro-
duced with each.
– The check points ( ) can be touched in any order.
– To reset the adjustment, press the [C] (clear) key, and then touch
the four check points ( ).
If the check points have been touched correctly, the indicator on the
[Start] key lights up in green.
4 Press the [Start] key.
The touch panel is adjusted, and the Accessibility Setting screen ap-
pears again.
5 Touch [Close] or press the [Accessibility] key.
The Basic screen appears again.
2
Note
If the touch panel cannot be adjusted, contact the technical representa-
tive.
!
Detail
To cancel the touch panel adjustment, press the [Stop] key or the [Reset]
key.
To Next Page
Loading...
Need help?
General
