Copy paper/originals
7
C300 7-3
Copy paper/originals Chapter 7
*1
There are five Foolscap sizes: 220 × 330 mm w, 8-1/2 × 13 w, 8-1/4 ×
13 w, 8-1/8 × 13-1/4 w and 8 × 13 w. Any one of these sizes can be select-
ed. For details, contact the technical representative.
*2
Can be used when optional punch kit is installed on finisher.
Loaded equipment Paper sizes that can be loaded
Finisher (FS-514) Finishing tray 1, 2 and optional Output Tray
11 × 17 w, 8-1/2 × 11 w/v, 5-1/2 × 8-1/2 w/v, 12-1/4 × 18 w (A3
wide w)
“Group”/“Sort” settings: 11 × 17 w to 8-1/2 × 11 w/v
Staple settings: 11 × 17 w to 8-1/2 × 11 w/v
Punch settings
*2
:
2-hole: 11 × 17 w to 8-1/2 × 11 w/v
3-hole: 11 × 17 w, 8-1/2 × 11 v
Output Tray (OT-601)
Saddle Stitcher (SD-503) Fold & staple: 11× 17 w, 8-1/2 × 11 w
Mailbin Kit (MT-501) 8-1/2 × 11 v, 5-1/2 × 8-1/2 w
Finishing tray (standard) 11 × 17 w to 5-1/2 × 8-1/2 w/v, 4 × 6 w, A3 w to B6 w, A6 w, 12
× 18 w (A3 Wide), 8K w, 16K w/v
To Next Page
Loading...
Need help?
General
