Copy paper/originals
7
C300 7-21
Copy paper/originals Chapter 7
– If a decimal value is displayed in the screen and the specified value
is outside the allowable range, the message “Input Error” appears.
Type a value within the allowable range. If the value was incorrectly
entered, press the [C] (clear) key to erase the value, and then spec-
ify the correct value.
8 Touch [OK], and then touch [OK] in the next two screens that appear.
The Basic screen appears again.
2
Note
The selected size button is programmed with the entered paper size, so
that the paper size is available to be selected again without having to be
typed in. In addition, the size can be changed.
To Next Page
Loading...
Need help?
General
