What to do if my Konica Minolta All in One Printer media mis-feed message stays on?
If the media mis-feed message persists on your Konica Minolta All in One Printer, try these steps: * Open and close the front cover again to reset the machine. * Check the media path again to ensure all misfed media has been removed.
What to do if media mis-feed message stays on Konica Minolta bizhub C35?
If your Konica Minolta All in One Printer displays a media mis-feed message that won't go away, try opening and closing the front cover again to reset the machine. Also, check the media path again to ensure that you have removed all of the misfed media.
How to fix media mis-feeding in Konica Minolta bizhub C35?
If your Konica Minolta All in One Printer is mis-feeding media, make sure the media is correctly positioned in the tray. Remove the misfed media and reposition it properly. Also, check that you have not exceeded the maximum number of sheets allowed in the tray; remove any excess. Ensure the media guides are correctly adjusted to the media size. Remove any warped or wrinkled media and smooth it out, or replace it with new media if smoothing doesn't help. If the media is moist, replace it with dry media. Ensure envelopes are loaded only in Tray 1, and labels, letterhead, postcards, thick stock, or glossy media are loaded in Tray 1 or 2. Custom-sized media should also be loaded in Tray 1 or 2.
Why does media type error appear on Konica Minolta bizhub C35?
If you receive a media type error on your Konica Minolta All in One Printer, particularly for Tray 3 or Tray 4, it means a media type like 'Thick paper' is specified for a tray that doesn't support it. Ensure you specify a media type supported by Tray 3 or Tray 4 to resolve this.
What to do if my Konica Minolta All in One Printer is not turning on?
If your Konica Minolta All in One Printer is not powering on, here are a few things you can check: * Ensure the power cord is correctly plugged into the outlet. Turn off the machine, confirm the power cord is correctly plugged into the outlet, and then turn on the machine. * Test the outlet by plugging another electrical appliance into it to see if it operates properly. * Make sure the power switch is correctly turned on (I position). Turn the power switch off (O position), then turn it back to the on (I position). * Verify that the machine is connected to an outlet with a voltage or frequency that matches the machine specifications. Use a power source with the specifications listed in appendix A, 'Technical Specifications.'
What to do if the dialog box appears unusual when selecting other manufacturer printer and back to bizhub on Konica Minolta bizhub C35?
If the dialog box appears unusual when selecting another manufacturer printer and back to bizhub on your Konica Minolta All in One Printer, close the Print dialog box, and then open it again.
How to fix Konica Minolta bizhub C35 All in One Printer not detected using Rendezvous/Bonjour?
If you're experiencing issues with your Konica Minolta All in One Printer not being detected via Rendezvous/Bonjour, use PageScope Web Connection to select [Enable] on the [Bonjour Settings] page.
What to do if Mac OS X 10.4 requests Letter-size paper when using custom paper size with Konica Minolta All in One Printer?
When using Mac OS X 10.4, if sending a job with a custom paper size of 21.6 cm width results in Letter-size paper being requested on your Konica Minolta All in One Printer, change the width of the custom paper size to 21.59 cm, and then try sending the job again.
How to resolve duplex mis-feeds on Konica Minolta All in One Printer?
If you are experiencing duplex mis-feeds with your Konica Minolta All in One Printer, make sure you are using KONICA MINOLTA-approved media and that you have not mixed media types in the tray. Also, check the media path inside the duplex again to ensure that you have removed all of the misfed media.
Why is Booklet Left and Right Binding output incorrect on Konica Minolta bizhub C35 All in One Printer?
If you are experiencing incorrect output with Booklet Left and Right Binding on your Konica Minolta All in One Printer, ensure that you choose 'Collate' only in the printer driver’s Basic Tab and do not set collation in the application.
General| Print Technology | Laser |
|---|---|
| Print Speed (Color) | 30 ppm |
| Print Speed (Monochrome) | 30 ppm |
| Maximum Print Resolution | 600 x 600 dpi |
| Standard Paper Capacity | 350 sheets |
| Maximum Paper Capacity | 850 sheets |
| Duplex Printing | Yes |
| Scan Resolution | 600 x 600 dpi |
| Fax Capability | Yes |
| Functions | Print, Copy, Scan, Fax |
| Paper Weight | 60-210 gsm |
| Processor | 800 MHz |
| Operating System Compatibility | Windows, Mac, Linux |
| Scanner Type | Flatbed, ADF |
| Connectivity | USB 2.0, Ethernet |
| Paper Size | A4, A5, B5, Letter, Legal |
| Scan Speed (Color) | 20 ipm |
| Scan Speed (Black) | 30 ipm |
| Fax Speed | 33.6 kbps |
| Copy Speed | 30 cpm |
To Next Page