What to do if the message “Replenish paper” appears on my Konica Minolta All in One Printer?
If the message “Replenish paper” appears, it means a tray has run out of paper during printing. Check which paper tray is indicated in color on the printer's display and then load it with paper.
How to fix Konica Minolta All in One Printer cannot connect to the network?
If your Konica Minolta All in One Printer can't connect to the network, it might be due to a connection problem. Ensure the network cable is properly connected. Also, verify that the Network Settings parameters in Administrator mode are correctly specified.
What to do if my Konica Minolta All in One Printer is unable to specify desired settings?
If you're unable to specify desired settings or print as specified on your Konica Minolta All in One Printer, it may be due to a few reasons. Some functions cannot be combined, so avoid selecting unavailable settings. An incorrect combination of functions may have been specified, so check the settings and specify the functions correctly. Incorrect settings may be specified in the fax driver, so check each setting. Also, the paper size, orientation, and other settings specified in the application may have priority over those in the fax driver, so enter the correct settings in the application. If you are using watermarks, check the watermark settings and ensure the density is not too low. Note that watermarks cannot be printed in graphics applications.
What to do if Konica Minolta All in One Printer shows no response?
If your Konica Minolta All in One Printer shows 'No response' when trying to communicate with the center, try communicating with the center again. Also, check the communication environment on the center side.
What to do if Konica Minolta All in One Printer shows busy line?
If your Konica Minolta All in One Printer displays a 'Busy line' error when trying to communicate, attempt to communicate with the center again.
How to fix 'Failed to establish an SSL/TLS communication with the device' message on Konica Minolta Software?
To resolve this, you can: (1) Use Web Connection to import a certificate to the device. (2) In the network settings, set "Enable SSL" of OpenAPI to "ON" or "Accept SSL communication only". (3) In the network settings, set "Enable SSL" of TCP socket IF to "ON".
What to do if Konica Minolta bizhub C451 All in One Printer won't copy after clearing paper misfeed?
If copies cannot be produced even after clearing a paper misfeed, it's possible that there are paper misfeeds at other locations. Check the touch panel for other paper misfeed indications, and then remove any misfed paper at all other locations.
Why is my Konica Minolta bizhub C451 not starting to copy?
If your printer isn't copying, it could be due to a couple of reasons: The upper right-side door of the machine might be open, so ensure that it is securely closed. Alternatively, there might be no paper in the tray that matches the document requirements. In this case, load paper of the appropriate size into the paper tray.
Why is my Konica Minolta bizhub C451 unable to fax?
If your Konica Minolta All in One Printer is unable to fax, there could be several reasons. First, ensure the fax driver is compatible with the printer controller by checking the selected printer name. Verify that the network or USB cable is properly connected. Check the printer's control panel for any error messages. Ensure sufficient memory is available by performing a test print. If a print job is queued, check the Active Jobs list. For account track settings, ensure the correct department name or password is entered. For authentication settings, verify the user name or password. If connecting to a network, consult with the network administrator to establish the connection. If enhanced security mode is enabled, specify the authentication settings or consult the network administrator.
What to do if Konica Minolta All in One Printer says the number of User Boxes has reached its maximum?
If the number of User Boxes has reached its maximum on your Konica Minolta All in One Printer, it means the limit of user boxes has been reached. To fix this, delete unnecessary user boxes, and then try registering new boxes again.
General| Brand | Konica Minolta |
|---|---|
| Model | bizhub C451 |
| Category | All in One Printer |
| Language | English |
To Next Page