2-46 bizhub C658/C558/C458/C368/C308/C258
Loading paper
2
2.8
2 Lift the Paper Feed Roller, and load paper into the unit.
% Load paper into the tray with the print side facing down.
NOTICE
Do not load custom sized paper into the Large Capacity Unit.
When changing the paper size, contact your service represent-
ative.
3 Close the Upper Door.
When you change the paper type, proceed to step 4 to change the setting on this machine.
When you do not change the paper type when adding paper, you can use the current setting without
making any changes.
4 Change the paper type setting.
% When loading paper other than plain paper, change the paper type setting. For details, refer to the
User's Guide CD/DVD.
2.8.4 Bypass Tray
Use the Bypass Tray when printing on a paper size other than for paper trays, or printing on envelopes or
transparencies.
To use the Bypass Tray, load paper and specify the paper type.
Applicable paper types
Plain paper, single-side-only paper, special paper, thick paper, postcard (4 e 6 (A6 Card)), transparency, let-
terhead, colored paper, envelope, label sheets, index paper, recycled paper, and banner paper
Applicable paper sizes
Type Size
Standard-size paper 12 e 18 w to 5-1/2 e 8-1/2 w/v, 4 e 6 w, SRA3 w, A3 w to A6 w, B4 w to
B6 w, A6 card w, 8 e 13 w, 16K w/v, 8K w, banner paper, envelope (B5
w (6-15/16 inches e 9-13/16 inches (176 mm e 250 mm)), C4 w (9 inches
e 12-3/4 inches (229 mm e 324 mm)), C5 w (6-3/8 inches e 9 inches (162
mm e 229 mm)), C6 w (6-3/8 inches e 4-1/2 inches (162 mm e 114 mm)),
DL w (8-11/16 inches e 4-5/16 inches (220 mm e 110 mm)), Com10 (4-1/8
inches e 9-1/2 inches (104.7 mm e 241.3 mm)), Monarch (3-7/8 inches e
7-1/2 inches (98.4 mm e 190.5 mm)))
Custom-size paper Paper width: 3-9/16 inches to 12-5/8 inches (90 mm to 320 mm)
Paper length: 5-1/2 inches to 47-1/4 inches (139.7 mm to 1,200 mm)
To Next Page
Loading...
Need help?
General
