bizhub C658/C558/C458 2-25
2.5 Canceling the Operation Prohibited State
2
2.5 Canceling the Operation Prohibited State
When a log-on to the Administrator Mode becomes successful, the machine enables the operation of Release
Setting performed for canceling the state of Prohibited Functions When Authentication Error (access lock
state) as a result of unauthorized access.
Release Setting clears the unauthorized access check count for all User Authentication, Account Track, all
Secure Print authentication, and all User Box authentication, resetting it to zero and canceling the operation
prohibited state. Perform the following procedure to cancel the operation prohibited state.
NOTICE
Never allow any general user to know the Administrator Password.
Forgetting the Administrator Password requires that a setting be made by the service engineer. Call your Ser-
vice Representative.
It is also possible for the service engineer to cancel the state of Prohibited Functions When Authentication
Error (access lock state) of the Administrator Authentication. Contact your Service Representative.
Performing Release Setting
0 For the procedure to call the Prohibited Functions When Authentication Error screen on the display, see
steps 1 through 3 of page 2-23.
0 Do not leave the machine with the setting screen of Administrator Mode left shown on the display. If it
is absolutely necessary to leave the machine, be sure first to log off from the Administrator Mode.
0 When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after
turning it off. if there is no wait period between turning the main power switch off, then on again, the
machine may not function properly.
1 Call the Prohibited Functions When Authentication Error screen on the display from the control panel.
2 Touch [Release].
Operation Prohibited State Canceling procedure
Administrator Authentication The operation prohibited state is canceled after the main power
switch is turned off and on and the period of time set in [Release
Time Settings] elapses.
User/Account authentication The Administrator touches [Release] to cancel the operation pro-
hibited state.
Secure Print authentication
User Box authentication
To Next Page
Loading...
Need help?
General
