How to fix Konica Minolta bizhub PRESS C6000 when you cannot specify the punch function?
It requires FD-503, a punch kit, or multi hole punch. Install the required options and enable them on the printer driver. Also, the hole punching cannot be specified when Booklet is selected as the paper type. Check the setting of each item of the printer driver.
Why Konica Minolta bizhub PRESS C6000 cannot punch?
Printed pages may be fed out without being punched if the paper is loaded into the paper source with an incorrect orientation. Check the orientation setting.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Monthly Duty Cycle | 300, 000 pages |
| Duplex Printing | Yes |
| Scanner Resolution | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Print Speed | 60 ppm |
| Network Connectivity | Ethernet (10/100/1000Base-T) |
| Copy Speed | 60 cpm |
Details the seven key functions of Color Centro for color printing and adjustment.
Step-by-step guide for installing Color Centro using the provided installer.
Describes the procedure to launch Color Centro and connect to the image controller.
Details the necessary steps and information for logging into Color Centro.
Details adjustments for individual hues: Tone Curve, Spot Color, and Alternative Color.
Explains the calibration function for printing charts and registering data.
Describes the two methods for calibration: automatic and manual using an instrument.
Explains how to measure the printed chart using the selected instrument.
Explains how to save the acquired calibration data to the image controller.
Explains tone curve adjustment for CMYK output density and brightness/contrast.
Describes how to load existing tone curves or create new ones.
Explains how to adjust tone curves for individual CMYK colors.
Guides on selecting and loading spot color tables for adjustment.
Describes how to select spot colors for adjustment and add new ones.
Details manual adjustment of CMYK values for spot colors.
Provides instructions on saving adjusted spot color tables.
Step-by-step guide for creating a new CMYK target profile using Color Centro Profiler.
Step-by-step guide for creating a new printer profile using Color Centro Profiler.
Step-by-step guide for creating a new RGB-CMYK device link profile.
Step-by-step guide for creating a new CMYK-CMYK device link profile.
Step-by-step guide for creating a new Color Configuration.
Step-by-step guide for creating a new Profile Set using Color Centro Profiler.
Explains how to improve Profile Set accuracy using Measurement Feedback.
Troubleshooting steps for issues preventing Color Centro from starting.
Addresses problems related to color adjustment and measurement.
Step-by-step guide for calibrating the scanner.
To Next Page