EN-28
Adjusting the Exposure (EV Compensation)
You can manually adjust the exposure determined by the digital camera. Use this mode when the proper
exposure cannot be obtained, for example, when the contrast (different between light and dark) between
the subject and the background is extremely large. The EV compensation value can be set in the range
from –2.0EV to +2.0EV.
1. Rotate the mode dial to P , , , or .
2. Press the ON/OFF button to turn on the power.
3. Press the MENU button, then use to select the [AE/AWB]
menu.
4. Use T to select [EXPOSURE], then use or to set the range
of EV compensation value from –2.0EV to +2.0EV.
5. To exit from the menu, press the MENU button.
PICTURE FUNCTION AE/AWB
EXPOSURE
W.BALANCE
ISO
100
+0.7
1 / 3
To Next Page
Loading...
