EN-59
Step 2: Connect the digital camera to your computer
1. Rotate the mode dial to and turn your camera on by pressing
the ON/OFF button.
2. Press to select the [CUSTOM] menu, then use T to select [USB].
3. Press the button.
4. Use S or T to select [PC CAM.], then press the button.
5. Connect one end of the USB cable to an available USB port on
your computer.
6. Position the digital camera steadily on top of your computer
monitor or use a tripod.
When using this digital camera as a PC camera, it is necessary to install the battery into the digital camera.
Step 3: Run your application software (i.e. Windows NetMeeting)
To use Windows NetMeeting for videoconferencing:
1. Go to Start
ÆÆ
ÆÆ
Æ Programs
ÆÆ
ÆÆ
Æ Accessories
ÆÆ
ÆÆ
Æ Communications
ÆÆ
ÆÆ
Æ NetMeeting to launch the NetMeeting
program.
2. Click the Start Video button to view live video.
3. Click the Place Call button.
4. Type the e-mail address or the network address of the computer that you are calling.
5. Click Call. The person that you are calling must also have Windows NetMeeting running and be
willing accept your call to start the videoconference.
The video resolution for videoconferencing applications is generally 320 x 240.
For more information about the operation of videoconference application software, refer to its respective help
documentation.
PC CAM.
PC
USB
3 / 3
PICTBRIDGE
To Next Page
Loading...
