EN-33
ADVANCED SHOOTING
Burst
This mode is used for continuous shooting. 3 pictures are taken continuously once the shutter button is
pressed.
1. Rotate the mode dial to , P ,
, , or and turn your
camera on by pressing the ON/OFF button.
2. Press the MENU button, then use to select the [FUNCTION]
menu.
3. Use T to select [CAPTURE MODE], then press the button.
4. Use S or T to select [BURST], then press the button.
5. To exit from the menu, press the MENU button.
The indicator is displayed on the monitor screen.
6. Press the shutter button halfway to lock the focus.
7. Press the shutter button all the way to shoot.
In this mode, the flash and the self-timer (10+2) features will be disabled.
If the remaining number of shots is less than 3, this mode will be disabled.
After capturing subsequent images in the sequence, if the remaining number of shots is less than 3, the camera
will show memory full message.
CAPTURE MODE
BURST
SINGLE
X1
AEB
2 / 3
PICTURE FUNCTION
2 / 3
AUTO
To Next Page
Loading...
