EN-50
This starts printing and displays the message “TRANSFERRING” on
the monitor screen.The message will disappear after the transferring is finished.
* To cancel printing:
Pressing the button during print data transfer displays the screen for
selecting whether to [CONTINUE] or [CANCEL] printing.
7
In [PRINT ORDER] Mode: This function only lets you print the specified image based on the previous
DPOF settings.
Step Figure
Procedure
Use S or T to select the [PRINT ORDER] mode, then press the button.
1
CANCEL :
TRANSFERRING
CONTINUE
PRINT
SELECT:
SET:
CANCEL
6
PRINT
CANCEL
PRINT
SELECT:
SET:
Step Figure Procedure
Use S or T to select [PRINT], then press the button to confirm.
PRINT
PRINT ORDER
PRINT MODE SELECT
SELECT:
SET:
To Next Page
Loading...
