Konica Minolta DiMAGE Z10 User Manual

18
G
ETTING UP AND RUNNING
Use the left and right keys to select the item to
be changed.
Use the up and down keys to adjust the item.
Press the central button to set the clock and
calendar.
SETTING THE DATE AND TIME
After initially inserting a memory card and batteries,
the camera’s clock and calendar must be set. When
images are recorded, the image data is saved with
the date and time of recording.
If the clock and calendar have not been set, a
message is displayed for a few seconds each time
the camera is turned on. This message is also
displayed if the clock and calendar are reset when
the camera is stored without batteries for a long
period.
Date/Time setup screen
MM / DD / YYYY
00 : 00
Date/Time set
:enter
2004 . 01 . 01
Set date/ time?
NoYes
Use the left and right keys of the controller (1)
to select “Yes.” “No” cancels the operation.
Press the center of the controller to open the
date/time setup screen.
The date/time setup screen can be opened in section 2 of
the setup menu.
:sel.:move
1

Konica Minolta DiMAGE Z10 Specifications

General

Image Sensor	1/2.5-inch CCD
Effective Pixels	3.2 million
Optical Zoom	10x
Focal Length	6.3-50.4mm
ISO Sensitivity	Auto, 50, 100, 200, 400
Shutter Speed	1/1000 to 8 seconds
Camera type	Compact
Max resolution	2048 x 1536
Sensor size	1/2.5-inch
Dimensions	107.5 x 67.5 x 51.5 mm
Sensor Type	CCD
Digital Zoom	4x
Display	1.5" LCD
Storage Media	SD card
Screen size	1.5"
LCD Screen Size	1.5 inches