Konica Minolta LS-150 - Page 45

3. Press the
UP
key or
DOWN
key to
select [Close-up Lens] and then press
the
ENTER
key.
4. The screen for selecting the type of the
close-up lens is displayed. Press the
UP
key or
DOWN
key to select the
lens to be used.
When close-up lens No. 110 is attached, select
[No. 110]. When close-up lens No. 122 is
attached, select [No. 122]. When nothing is
attached in front of the objective lens, select
[None].
5. Press the
ESC
key.
The measurement screen is displayed on the
LCD screen.
The lens type setting is stored even when the
power switch is set to OFF ().
43
Settings
OBJECTIVE LENS