Need help?Do you have a question about the Konica Minolta CM-26dG and is the answer not in the manual?
General| Model | CM-26dG |
|---|---|
| Spectral Interval | 10 nm |
| Light Source | Pulsed xenon lamp |
| Connectivity | USB, Bluetooth |
| Type | Portable spectrophotometer |
| Measurement Geometry | d/8° (diffuse illumination, 8° viewing) |
| Aperture Size | MAV: Ø8 mm / SAV: Ø3 mm |
| Measurement Area | MAV: Ø11 mm / SAV: Ø6 mm |
| Measurement Range | 0 to 200% |
| Measurement Time | 1 second |
| Inter-Instrument Agreement | Within ΔE*ab 0.15 (Average of 12 BCRA tiles compared to values measured with master body) |
| Gloss Measurement | 60° |
| Display | Color LCD |
| Power Supply | Rechargeable lithium-ion battery |
| Operating Temperature Range | 0 to 40 °C |
| Operating Humidity Range | 20 to 80% RH (no condensation) |
| Storage Humidity Range | 10 to 90% RH (no condensation) |
Overview of standard and optional items for the instrument.
Identification and explanation of the instrument's physical components.
Step-by-step guide outlining the measurement process.
Steps required before starting a measurement, including setup.
Procedures for instrument calibration including zero, white, and gloss.
Configuration of measurement parameters like mode, averaging, and illuminants.
Methods for connecting the instrument to computers or printers via USB or Bluetooth.
Common issues, check points, and recommended actions to resolve problems.
To Next Page
