Konica Minolta CM-25d User Manual

Spectrophotometer
CM-26dG
CM-26d
CM-25d
En
Instruction Manual
Please read before using the instrument.

Konica Minolta CM-25d Specifications

General

Brand	Konica Minolta
Model	CM-25d
Category	Measuring Instruments
Language	English

Summary

Spectrophotometer CM-26dG / CM-26d / CM-25d

Instruction Manual

Manual providing operating instructions for CM-26dG, CM-26d, and CM-25d spectrophotometers.

Safety Information

Safety Precautions

Details essential safety precautions to ensure correct and safe instrument use.

CAUTION

Introduction and Notes on Use

Chapter 1 Before Using the Instrument

Names and Functions of Parts

Initial Setup and Operation

Chapter 2 Measurement

Flow of Measurement

Illustrates the sequential steps for basic and simple measurement procedures.

Measurement Preparation

Calibration Procedures

Zero calibration

Procedure for performing zero calibration to eliminate stray light effects and ensure accuracy.

Performing Measurements

Displaying the Measurement Results

Describes how measurement results are displayed on the LCD screen, including various detail screens.

Sample Detail Screens

Measurement (Simple Mode)

Pass/Fail Judgment and Target Operations

Tolerance Settings

Chapter 3 Setting

Measurement Condition Settings

Observation Condition Settings

Instrument Settings

User type

Chapter 4 Other Functions

Connecting to an External Device

System Settings

Chapter 5 Troubleshooting

Message List

Lists and explains various error and warning messages displayed by the instrument.

Troubleshooting Guide

Chapter 6 Appendix

Specifications