Security Function Ver. 1.02 Mar. 2016
i
CONTENTS
Security function
1. Overview ................................................................................................................. 1
2. Compliance with the ISO15408 standard ................................................................ 1
3. Installation of the machine and steps to be performed before operation.................1
3.1 Unpacking and setting up the machine................................................................. 1
3.1.1 Removing the machine ................................................................................. 1
3.1.2 Removing protective tape, packing and other shipping materials .................1
3.1.3 Installing the toner cartridge..........................................................................2
3.1.4 Installing and replacing the hard disk............................................................2
3.1.5 Installing other options .................................................................................. 2
3.1.6 Mounting the accessory parts ....................................................................... 2
3.1.7 Connecting the power cord ...........................................................................2
3.1.8 Starting the machine .....................................................................................2
3.1.9 Make the necessary settings.........................................................................2
3.1.10 Performing Non-Image Area Erase Check .................................................... 3
3.1.11 Configuring other options .............................................................................. 3
3.1.12 Connecting the network cable....................................................................... 3
3.1.13 Network setting ............................................................................................. 3
3.1.14 Restarting the machine ................................................................................. 3
3.1.15 Adjusting each option .................................................................................... 4
3.1.16 Affixing the paper size label .......................................................................... 4
3.1.17 Installing the user’s guide holder................................................................... 4
3.1.18 Affixing the panel sheet................................................................................. 4
3.1.19 Checking for parts mounted on the machine ................................................ 5
3.1.20 Switch setting for secured start .....................................................................5
3.1.21 Setting for Custom Function Pattern Selection .............................................5
4. Precautions for operation control.............................................................................6
5. Checking the firmware version number ................................................................... 8
5.1 Security authentication firmware version number................................................. 8
6. Accessing the Service Mode ................................................................................... 8
6.1 Access method to the Service Mode ....................................................................8
6.2 Access lock of Service Mode.............................................................................. 10
6.2.1 Access lock release procedure ................................................................... 10
7. Enhancing the security function ............................................................................ 11
7.1 Details of settings ...............................................................................................11
7.2 Security enhancing procedure ............................................................................ 12
To Next Page
Loading...
