Konig CMP-BARSCAN31 User Manual

6
6) Charging the CMP-BARSCAN40:
• Plug the 5 V DC power adapter into the DC jack of the bracket.
• Plug the power adapter into a 220 V wall socket.
• After placing the scanner on the bracket, it will automatically make contact with the
power connection of the bracket. This way the scanner will be charged but will also
work continually through the power adapter.
Put the scanner on the bracket
Bracket of
scanner
DC port

Konig CMP-BARSCAN31 Specifications

General

Brand	Konig
Model	CMP-BARSCAN31
Category	Barcode Reader
Language	English