33
Code byte 5
5) After setting successfully, the scanner resets and sounds a beep.
Note:
A) To change the barcode suffix ID character, in step 1, you should scan barcode 01402
to open adding suffix ID character function, instead of scanning barcode 01401.
Then follow the step 2 to step 5
B) To change the ID character of the ISBN code, before doing the example steps, you
should scan the setup barcode 00481 first to transfer from EAN-13 code to ISBN
code, then follow step 1 to step 5.
8) ASC11 reference table:
HEX Value Decimal Value/
Code Byte Value
Character Control
Keyboard Eqv
To Next Page
Loading...
Need help?
General
