Recover lost data:
Power error will cause data lost and the recorder will ask for ‘recover
data’ please press “ Select” to proceed.
Restore recording process:
When power error happen during recording process, system will
automatically restore recording process after power reconnected.
Specifications:
ITEM DESCRIPTION NOTE
Video Format NTSC / PAL
Operation System None STAND-ALONE
Camera Input Channel 4 channel Composite BNC
Video Output Channel 1channel Composite BNC
NTSC 120 frames/second 4 x 30 frames/second
Display Frame Rate
PAL 100 frames /second 4 x 25 frames/second
NTSC Max 30 fps (Quad) Quad Mode
Recording Frame
Rate
(Quad)
PAL Max.25 fps (Quad) Quad Mode
NTSC
Each Channel =
30 ÷ Number of Source
Max. 30 frames/s
(Each Channel)
Recording Frame
Rate
(Each Mode)
PAL
Each Channel =
25 fps ÷ Number of Source
Max. 25 frames/s
(Each Channel)
Record Mode Continuous, Time Schedule, Motion Triggered.
Display
NTSC：720 x 480
PAL ：720 x 576
Resolution
Record
NTSC：320 x 112, 640 x 224
PAL ：320 x 136, 640 x 272
Quad ：640 x 224
(total)
Each ：640 x 224
Video Compression Format
(Each Channel)
Modified Motion-JPEG
(12-20K bytes/frame)
Low : 12K Byte
Normal : 15K Byte
High : 20K Byte
HDD Support
300G Byte (Seagate recommended)
ATA -100 Interface
Estimated Record Length
120G Hard disk @ 7 fame per second @ Normal Quality
(120*1024*1024 K byte) ÷ ( 7*15*60*60 ) = 332 Hours
Method
Time、Date、Event
Search
Full
Screen
YES
Dimension ( D x W x H ) 215mm * 132mm * 80mm
English Deutsch Français Nederlands
To Next Page
Loading...