EasyManua.ls Logo

KOOBRICK Boxi - Page 22

KOOBRICK Boxi
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 22
This is the name of the Document
Gateway Address
The gateway IP address of your network. Normally, it is the
LAN IP address of the router you are using to access the
Internet.
DNS address
Fill in the IP address of a live DNS server.
Secondary/Third
DNS Address
(optional)
This is optional. You can enter another DNS server’s IP
address as a backup. The secondary/third DNS will be used
when the above DNS server fails.
Jumbo Frame
Normally, maximum standard ethernet packet size is 1514
bytes. Koobrick Boxi can provide enough le transmission
throughput under 1514 bytes packet size. If you have huge
amount of les to transfer in a short time and wish Koobrick
Boxi to provide higher transmission speed, you can try
jumbo frame. Jumbo frame contains more than 1514 bytes
of data in one network packet, so it can provide higher
transmission speed. Koobrick Boxi support jumbo frame up
to 6K bytes packet size. Before using jumbo frame, please
be sure that your PC is using a gigabit network card
supporting jumbo frame and the ow control of the gigabit
network card is enabled; and if you are using a gigabit
switch, you also have to make sure that the switch support
jumbo frame. But jumbo frame is not a standard, so please
try to upload and download one le larger than 1G bytes to
make sure that jumbo frame function of your gigabit
network devices are compatible with this storage server.
Click <Apply> at the bottom of the screen to save the congurations.
Boxi User Manual
Version 1.0