KOOBRICK Boxi - Configuration Tools; Firmware Upgrade

Page 52
This is the name of the Document
8.4 Configuration Tools
The Conguration Tools allow you to save (backup) the Koobrick Boxi’s current settings.
Saving the conguration provides an added protection and convenience when there’re
some problems with the Koobrick Boxi, and you have to reset to factory default to solve
the problem.
You can upload the saved conguration to the Koobrick Boxi through the Restore Set-
tings tool. If extreme problems occur you can use the Restore to Factory Default tool,
this will set all congurations to its original default settings (e.g. when you purchased
the Koobrick Boxi)
Parameter
Description
Conguration
Tools
Use the “Backup Settings” tool to save the Koobrick Boxi’s
current conguration to a le named “cong.bin” on your
PC. You can then use the “Restore Settings” tool to restore
the saved conguration to the Koobrick Boxi. Alternatively,
you can use the “Restore to Factory Defaults” tool to force
the Koobrick Boxi to perform a power reset and restore to
original factory settings.
8.5 firmware Upgrade
This tool allows you to upgrade the Koobrick Boxi’s system rmware. To upgrade
the rmware of your Koobrick Boxi, you need to download the
rmware(www.jensenscandinaia.com) le to your local hard disk, and enter that le
name and path in the appropriate eld on this page. You can also click the browse
button to locate the rmware le on your PC.
When upgrading rmware, do NOT:
* Disconnect computer from network
* Disconnect power on Koobrick Boxi
* Restart computer
* Disconnect Koobrick Boxi from network
If any of this is done during upgrade, the Kobrick Boxi might be damaged.
Boxi User Manual
Version 1.0