Page 51
This is the name of the Document
Free
The remaining free space of the partition.
Used Status
The type of the partition. It can be FAT16, FAT32, NTFS or
Linux.
Refresh
You can click this button to refresh the Storage Status.
8.3 USB Copy
USB Copy tool allows you to copy the content of one external USB mass storage
device to another attached storage device. When you press the Copy button on the
front panel of this Koobrick Boxi, the copy job will be triggered.
Note: Before you trigger the USB Copy function by pressing the Copy button on the
front panel of this Koobrick Boxi, make sure that the destination folder has enough
free space to store all data of the source USB mass storage device.
Parameter
Description
Source Path
Select USB port that the source USB mass storage device
of the USB Copy job will be plugged in.
Saved Path
Select a shared folder as the destination of the USB Copy.
The USB Copy tool will create a folder named “USBCopy”
under the shared folder you selected. Each time when you
press the Copy button on the front panel of the Koobrick
Boxi to trigger the USB Copy job, a new folder named with
the trigger time will be created under the “USBCopy”
folder and the newly created folder will be the destination
folder of the USB Copy job.
Click <Save> button to save the congurations.
Boxi User Manual
Version 1.0
To Next Page
Loading...