Page 31
This is the name of the Document
Parameter
Description
Folder Name
The name for shared folder that shows in My Network
Places on client computer.
Shared Folder’s
Path
Click on “Browse” to select the folder to be shared.
If you select “Share all folders in storage”, the Koobrick Boxi
will create a share item for each partition of all currently
attached storages. The share name of each share item
consists of three parts, assigned folder name, disk name
and partition name, and the three parts are separated by
“_”. There are 3 possible disk names, HDD1, HDD2, RAID,
USB1 and USB2. For example, if you add a shared folder
by assigning “All” as the folder name and select “Share all
folders in storage”, and now you have an internal SATA hard
disk drive with one partition and one USB hard disk drive
with 3 partitions attached on USB2. Then after you create
the shared folder, there will be 4 share items created with
the name of “All_HDD1_C”, “All_USB2_C”, “All_USB2_D”,
“All _USB2_E”.
Users/Groups
You can assign access privilege of the shared folder to all
users and groups here. There are three users/groups lists.
The left list contains all users and groups that have not
been assigned privilege on this shared folder. The upper
right list contains all users and groups that only have read
privilege on this shared folder. The lower right list contains
all users and groups that have read and write privileges
on this shared folder. If you assign “Read Only” or “Read &
Write” privilege to “anonymous”, then all users can access
this folder without password.
Description
Description The comments or descriptions for this share
folder.
Shared to
You can select to share the folder vi My Network Places
and/or FTP.
Click <Save> at the bottom of the screen to save the congurations.
Boxi User Manual
Version 1.0
To Next Page
Loading...