Page 41
This is the name of the Document
8. Tools
Tools menu provides several management tools, including Storage Tools, Storage
Status, USB Copy, Cong Tools, Firmware Upgrade and Reset.
Storage Tools (see chapter 8.1)
You can use the Storage Tools to manage the partition and format of the attached
storage devices. It also allows you to build RAID 0, JBOD or RAID1 if you have two
internal SATA hard disk drives installed.
Storage Status (see chapter 8.2)
This Page shows the status of all attached storage devices.
USB Copy (see chapter 8.3)
USB Copy tool allows you to copy the content of one external USB mass storage
device to another attached storage device. When you press the Copy button on the
front panel of this Koobrick Boxi, the copy job will be triggered.
Config Tools (see chapter 8.4)
The Conguration Tools allow you to save (backup) the Koobrick Boxi’s current
settings.
Firmware Upgrade (see chapter 8.5)
This tool allows you to upgrade the Koobrick Boxi’s system rmware.
Reset (see chapter 8.6)
You can reset the Koobrick Boxi’s system when there’s something wrong with the
Koobrick Boxi.
Boxi User Manual
Version 1.0
To Next Page
Loading...