The appliance has
an odour.
- The smell is caused by rubber material that is attached to the appliance
inside. This kind of smell is arubber’s own smell and disappears
automatically after using the appliance several times.
- When washing the clothes, use the detergent in accordance with the
manufacturers recommendations. If you use the detergent excessively
not according to the recommendations, undissolved detergent may
accumulate on the clothes and cause an odour.
- You can smell odours from the clothes if the clothes were left in the
appliance after drying or in the washing machine after washing. Unload
the clothes promptly at the end of the drying or washing cycle.
- Ensure you can smell same odour in the washing machine. If so, clean
the tub of the washing machine referring to the washing machine user
manual.
- Always take care of both lint filters clean. If any residues were left in
the lint filter after drying, it may cause odours. And also dry the lint filter
completely after cleaning.
The machine is
powered on and
started directly
after power failure,
but does not work
-When the program is suspended, the set functions cannot be changed.
If the program or function needs to be changed during operation, or the
power is o during operation and the power needs to be powered on
again, turn the knob to “O”, then turn the knob again to select the required
program and function, and finally start it.
Information codes
Code Interpretation Recommended handling method
F50/F51
Abnormal sensor -Si prega di contattare il servizio di assistenza.
F21
Abnormal display panel
and the power board
- Rotate the knob to “O” to shut down the dryer, and
restart it after 10 seconds.
- If the abnomality is not removed, please contact
after-sales service.
To Next Page
Loading...