Kooper Respiro - Page 36

36
UV-C Lamp
Press the button on the remote control to turn
on the UV-C lamp.
• Press again to turn off the UV-C lamp (otherwi-
se, the UV-C lamp will turn off automatically after
1 hour).
After power on, the UV-C lamp indicator will be
displayed on the LED screen.
Main body swing
• Press the button on the remote control to
start the main body oscillation (the oscillation
angle is 80°±5°).
• Press again to stop the swing.
Timer
• Press the button on the remote control to
set the automatic programmed shutdown (1 to 8
hours). At the end of the set time, the appliance
automatically stops its operation.
• To restart the unit, press (touch button on
LED screen or physical button on the remote
control).
Power Saving Mode (Sleep
Mode)
• Press on the remote to turn on “Warm” mode.
• Once this mode is activated, the temperature
indicator on the LED screen will light up orange.
• To turn off the “Warm” mode press again .
“Warm” mode
• Press on the remote to turn on “Warm”
mode.
• Once this mode is activated, the temperature
indicator on the LED screen will light up orange.
• To turn off the “Warm” mode press again .
• In “Warm” mode, press +/- (red buttons) on the
remote control to adjust the temperature to the
desired value (up to 30°C).
•10 seconds after setting the desired temperatu-
re, the LED display will stop ashing and will show
the ambient temperature.
• NOTE: This key does not work in “Ventilation”
mode
•When the ambient temperature reaches the set
temperature, “Warm” mode will be interrupted.
The product will continue to work for 40 seconds,
and will then return to Stand-By mode.
•When the ambient temperature drops below the
set temperature, the heating function will be auto-
matically reactivated.
•After 9 hours of activation of the “Warm” mode,
the product will automatically stop working. Re-
start by pressing the button via LED screen or
remote control.
• Press + (white button) on the remote control
to increase the intensity of the air ow; press —
(white button) to decrease it.
• The “Warm” mode provides 4 levels of air ow
intensity.