Korg 01/W pro - Page 24

The tone of every instrument also changes over time in a particular
way. The Multisounds themselves include a certain amount of tonal
variation, but if you find this insufficient for your purposes, however,
you will need to use the VDF EG to create the shape you desire. Be-
low you will find the VDF envelope shapes for the instruments we
showed you when we were discussing the VDA. Please compare
them with the VDA envelopes, and refer to this information when you
“are creating your own sounds.
CUTOFF FREQUENCY
PIANO
TIME
CUTOFF FREQUENCY
BRASS
SLOWER THAN VOLUME SHORTER THAN VOLUME
24
CUTOFF FREQUENCY
SLOW ATTACK STRINGS
CUTOFF FREQUENCY TIME
STRINGS PLAYED QUICKLY
EE TIME
FASTER THAN VOLUME
Unlike the VDA EG, the VDF EG has a Release Level (R) parameter.
In addition, all of the level parameters may be set to negative values.
The following chart illustrates how the VDA EG parameters change
the cutoff frequency over time. Compare ft with the chart we pre-
sented above for the VDA to see how they differ.
VDF EG SETTINGS
EG Intensity value
Attack Level
KEY OFF
TIME
Release
Attack Decay Levet
Time Time Slope Time Release
Time