10
REVERB effects
F5: SLAP
This models the reverb of a very small space with short reverberation.
F6: SPRING
A model of the spring reverb system used in guitar amps - ideal for surf music!
F7: PLATE
This models a type of reverb unit that works by vibrating a metal plate instead of a spring. It is adjusted to a fairly
short reverb time. This reverberation is characterized by a rapid attack, and is suitable for percussive playing.
F8: ROOM
This models the reverberation of a typical room, with numerous early reflections.
F9: HALL
This models the reverberation of a concert hall with numerous echoes.
Main MIX Adjusts the mix amount of the reverb.
P1 TIME Sets the reverb time. The relation between this setting and the actual length of rever-
beration will differ depending on the reverb type.
P2 HI DAMP Adjusts the attenuation of the high-frequency range.
P3 LO DAMP Adjusts the attenuation of the low-frequency range.
To Next Page
Loading...