Korg Ax3G - DRIVE;AMP Models; DRIVE Models

4
F9: DRONE
This models the sympathetic strings (drone) of a sitar. Set the Key to match the song you're playing.
Main KEY Specifies the key of the drone.
P1 MIX Adjusts the mix level of the drone.
P2 RESO Adjusts the amount of resonance.
DRIVE/AMP models
The drive/amp model you select here will change the character of the tone controls and their placement within the circuitry, producing
the response that's unique to each model. This choice also selects an appropriate cabinet model.
DRIVE models
d0: TUBE OD (TUBE OVERDRIVE) Cabinet: C0 (TWEED 1x8)
This models an overdrive pedal housed in a garish, "seasick green" box, that is considered an all-time classic due
to the wonderfully warm tones it produces.
d1: BTQ OD (BOUTIQUE OVERDRIVE) Cabinet: C1 (TWEED 1x12)
This models an overdrive unit named after a half-human half-horse creature appearing in Greek fables.
d2: FAT DIST (FAT DISTORTION) Cabinet: C2 (TWEED 4x10)
This models a pedal named after one of the most disliked rodents to ever walk the planet! The result is a smooth
distortion rich in harmonics.
d3: OR DIST (ORANGE DISTORTION) Cabinet: C3 (BLACK 2x10)
This models a classic distortion unit manufactured in Japan and packaged in an orange box.
Main GAIN Adjusts the gain.
P1 TONE Adjusts the high-frequency tone.
P2 VOLUME Adjusts the volume.
d4: METAL (METAL DISTORTION) Cabinet: C9 (US V30 4x12)
This models a distortion unit that's ideal for metal.
d5: SHRED (SHRED DISTORTION) Cabinet: C8 (US T75 4x12)
This distortion resembles the sound produced by a large amp stack.
Main GAIN Adjusts the gain.
P1 TEBLE Adjusts the high-frequency tone.
P2 MIDDLE Adjusts the mid-frequency tone.
P3 BASS Adjusts the low-frequency tone.
P4 VOLUME Adjusts the volume.
d6: FUZZ Cabinet: C7 (UK H30 4x12)
Retro, rude `n' raw ... the name says it all.