7
MOD (MODULATION) effects
Here you can select one of 10 modulation-type effects.
F0: CL CHO (CLASSIC CHORUS)
This models a chorus unit that has two modes (chorus and vibrato), and is best-known for being built into a
guitar amp.
Main SPEED Adjusts the modulation speed.
P1 DEPTH Adjusts the modulation depth.
P2 MANUAL Adjusts the center frequency of the sweep. If DEPTH is set to 10, MANUAL will not
function.
P3 MODE Selects the output mode.
1: Mono output.
2: Stereo mode in which the effect is panned right, and the dry sound panned
left.
3: Vibrato mode, in which only the effected sound is output. Setting MANUAL
to 10 will minimize the delay of the output.
F1: MT CHO (MULTI TAP CHORUS)
This is a chorus with independent taps for left/center/right, adding depth and spaciousness to your sound.
Main SPEED Adjusts the modulation speed.
P1 DEPTH Adjusts the modulation depth.
P2 TIME Adjusts the delay time.
P3 MIX Adjusts the mix level of the effect.
F2: CL FLN (CLASSIC FLANGER)
A model of a truly classic analogue flanger that "unchained" a highly influential modern guitarist who many hail
as the "godfather of two handed tapping."
Main SPEED Adjusts the modulation speed.
P1 RESO Adjusts the amount of resonance.
P2 DEPTH Adjusts the modulation depth.
P3 MANUAL Adjusts the center frequency of the sweep. If DEPTH is set to 10, MANUAL will not
function.
P4 MIX Adjusts the mix amount of the effect.
F3: BI CHO (BI CHORUS)
This is a chorus model unique to the AX3G. It provides two chorus units, CHORUS 1 and CHORUS 2, and lets
you connect the two units not only in series or in parallel, but also to synchronize or de-synchronize the two
LFOs. It produces a variety of tones that cover a range from wonderfully spacious sounds to bizarre flanger-like
sounds with complex modulation.
Main SPEED 1 Adjusts the modulation speed of CHORUS 1.
P1 SPEED 2 Adjusts the modulation speed of CHORUS 2. This will not function if MODE is set to
2 or 3.
P2 DEPTH Adjusts the modulation depth of CHORUS 1/2.
P3 RESO Adjusts the amount of resonance for CHORUS 1/2.
P4 MODE Specifies the connection and LFO for CHORUS 1/2.
1: CHORUS 1/2 are connected in series.
2: CHORUS 1/2 are connected in parallel.
3: CHORUS 1/2 are connected in parallel, and their LFOs are synchronized.
4: CHORUS 1/2 are connected in parallel, and their LFOs are synchronized in
opposite phase (Stereo mode).
To Next Page
Loading...