9
F9: FILTRON
This is an envelope controlled filter - a filter that opens and closes according to the guitar input.
Main SENS/POL Adjusts the sensitivity of response to the guitar volume, and the direction of move-
ment.
P1 ATTACK Adjusts the speed of response.
P2 RESO Adjusts the amount of resonance.
P3 MANUAL Sets the cutoff frequency.
P4 DEPTH Adjusts the depth of the effect. If DEPTH is set to 10, MANUAL will not function.
DELAY/REVERB effects
DELAY effects
F0: ECHO+ (ECHO PLUS)
This models one of the most respected analogue tape echo machines ever made. In the original, the "echo" is
produced by a playback head and the exact "delay time" is set by varying the motor speed. Many professionals
prefer these "lo-fi" units because of the warm, dark echoes they produce.
F1: MLT HD (MULTI HEAD ECHO)
This is a model of a tape echo unit boasting three playback heads. The echo from each head has its own feedback
loop, letting you create warm and complex "multitap" echo effects.
Main MIX Adjusts the mix amount of the delay.
P1 TIME Sets the delay time.
P2 FEEDBACK Adjusts the amount of feedback.
P3 TONE Adjusts the tone of the delay.
F2: MOD DLY (MODULATION DELAY)
This models Korg's first digital delay, the SDD-3000. You can also use this to produce chorus or flanger-like effects
by setting a short TIME and using the LFO to modulate it.
Main MIX Adjusts the mix amount of the delay.
P1 TIME Sets the delay time.
P2 FEEDBACK Adjusts the amount of feedback.
P3 SPEED Adjusts the modulation speed.
F3: ST DELAY (STEREO DELAY)
A stereo delay with a time difference between the left and right channels adds a spacious feeling.
F4: PP DELAY (PING PONG DELAY)
This is a stereo delay where the sound bounces between the left and right channels.
Main MIX Adjusts the mix amount of the delay.
P1 TIME Sets the delay time.
P2 FEEDBACK Adjusts the amount of feedback.
P3 TONE Adjusts the tone of the delay.
To Next Page
Loading...