Korg B2 - Getting Started and Basic Operation; Connecting Power and Pedals; Powering On and Volume Adjustment

Address : 316 SOUTH SERVICE ROAD, MELVILLE, NY
Telephone : 1-631-390-6500
Equipment Type : DIGITAL PIANO
Model : B2/B2N
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
Notice regarding disposal (EU only) :
When this “crossed-out wheeled bin” symbol is displayed on the product, owner’s manual, battery, or battery
package, it signifies that when you wish to dispose of this product, manual, package or battery you must do so in an
approved manner.
Do not discard this product, manual, package or battery along with ordinary household waste.
Disposing in the correct manner will prevent harm to human health and potential damage to the environment.
Since the correct method of disposal will depend on the applicable laws and regulations in your locality, please
contact your local administrative body for details.
If the battery contains heavy metals in excess of the regulated amount, a chemical symbol is displayed below the
“crossed-out wheeled bin” symbol on the battery or battery package.
Getting Started
The B2SP includes a stand with pedal unit, for use only with the B2SP. Follow the steps below after putting the
stand together.
1. Insert the DC plug of the supplied AC adapter into the DC IN jack on the rear panel of the instrument.
Loop the AC adapter cord around the cord hook to prevent the plug from being accidentally removed f r o m t h
e D C I N j a c k . When unhooking the cord from the hook, do not pull on the cord or use excessive force.
2. For the B2/B2N, connect the connector of the supplied damper pedal to the PEDAL jack on the bottom panel
of the keyboard. For the B2SP, connect the connector of the stand’s pedal unit to the PEDAL jack on the
bottom panel of the keyboard.
3. Insert the supplied AC adapter into an AC outlet.
4. Turn the B2/B2SP/B2N Digital Piano on. Press and hold the Power button to turn the instrument on; the Power
LED will light up. For now, leave the piano on. When you are done playing, press the Power button again to turn the
instrument off; the Power LED will go dark.