Note : To protect your hearing, do not listen to loud, high-volume sounds for a long period of time through
headphones.
When connecting an external input device : Use an audio cable to connect the AUDIO IN jack (stereo mini plug) on
the back of the B2/B2SP/B2N with other electronic musical instruments, audio players, etc. The input signal will be sent to
the speakers and the PHONES jack of the B2/B2SP/B2N. This input signal cannot be outputted via the USB-AUDIO port.
Note : The volume may be loud depending on the settings of the external input device, so adjust the volume on that
device.
When using USB-MIDI and USB-AUDIO : Connect the USB port on the back of the B2/B2SP/B2N to your computer with
a USB cable to exchange MIDI or audio data.
Note : When connecting to your computer, The volume may be loud depending on the settings, so adjust the
volume on your computer.
Note : When the B2/B2SP/B2N is first connected to your Windows computer, the USB-MIDI driver pre-installed with
the operating system will be used automatically. This pre-installed USB-MIDI driver will not allow the B2/B2SP/B2N to
access multiple programs or applications at the same time. To remedy this situation, simply download the KORG USB-
MIDI driver at www.korg.com and install the driver as instructed with the supporting documentation.
Note : Even if the B2/B2SP/B2N will not be used with multiple applications, we recommend installing the KORG
USB-MIDI driver, which should provide improved operating stability.
Feature Guide
Selecting Sounds
The B2/B2SP/B2N provides 12 keyboard instrument sounds.
Press the SOUND button to cycle through the preset sounds. Each press will advance to the next sound, in the
order shown in the illustration:
To Next Page
Loading...
