19
Basic operation
1: Setup and
listening to the
demo song
2: Recording3: Playback4: Overdubbing5: Mixdown and
mastering
6: Structure
3) Press the PLAY button to begin playback (the button will light).
4) Press the STOP button to stop playback (the PLAY button will go dark).
5-4. Saving your song
On the D888, the song data that you have recorded or edited and the parameters
that you have set are automatically saved during the power-off operation when
you return the D888 to the standby mode. These settings are also saved when you
select a different song. This is called “auto-save”.
You can also save data manually (→p.36 “1-4. Saving a song”).
6: Structure
The following illustration is a simplified diagram showing the audio signal flow of the
D888
’s re-
corder and how the knobs and faders control the sound.
Use section “A” to adjust the recording level from each channel input to the channel tracks.
While recording, you can use section “B” to adjust the monitoring tone and volume.
You can also use section “B” to make adjustments when playing back the recorded performance.
Use section “C” to adjust the level that is recorded on the master track and sent from the output.
8
7
6
5
4
3
2
INDIVIDUAL
OUT
Ch Track
Recoder
Ch out
L
R
To Effect
Ch 1
Tr im
EQ
Ch Fader
Eff Send
PA N
INPUT
EFFECT
A
B
B
C
MASTER OUT
MASTER Trk
Recorder
Master Fader
MONITOR OUT
Master track
Input
Channel mixer
Effect
5: Mixdown and
mastering
6: Structure
To Next Page
Loading...
Need help?
General
