Korg ddd-1 - Basic Operation

2. RECOGNIZED RECEIVE DATA
. CHANNEL MESSAGES
k nnnn=0 ~ 15: Channel Numbers set via the MIDI Receive Function at OMNI MODE ON, all messages received regardless c
setting. At OMNI MODE OFF, only set Channel Message is received. However, Channel Mode Messages receiv
set Channel Messages regardless of OMNI ON/OFF status.
4OTES
1. Recognized Note OFF Note Numbers
k k k k k k k = 9 ~24(SEQ DECAY)
k k k kkkk = 72~96(SEQ TUNE)
* kkk kkkk = 25 ~ 71 is ignored.
2. Recognized Note ON Note Numbers
kkk kkkk = 9 ~24(SEQ DECAY)
kkk kkk k =25-71 (INST KEY)
kkk kkkk =72~96(SEQTUNE)
5. When a Program Change Message is received in the INST SETTING mode, Instrument settings may be altered.
A- Program change Numbers outside of the range are ignored. Program change Numbers outside of the p p p pppp
= 0-5 range are ignored. x
2. SYSTEM MESSAGES
NOTES
1. Recognized when Data Transfer Mode is set to MIDI.
2. Recognized only when Song Select Function is set to STOP. Song Numbers outside the sss ssss=0 ~ 9 range are ignored.
3. Recognized when Clock is set to MIDI.
Scan by Manual Manor
http://www.markgllinsky.com/ManualManor.html