Korg DS-DAC-10R - DS-DAC-10 R Basic Operation; Windows DSD Native Playback (ASIO)

10
Basic operation
DSD native playback via Windows (ASIO)
1
Use the AudioGate and USB Audio Device Setup program to install AudioGate (refer
to “Installing the ASIO driver/AudioGate” on page 3).
2
Connect the DS-DAC-10R to your computer, and then start AudioGate.
If you start AudioGate without the DS-DAC-10R connected, license verication will be
completed when you connect the DS-DAC-10R.
3
From the menu, choose [Edit]-[Preferences...], and click the [Audio Devices] tab.
4
In [Driver Type], choose “ASIO.”
5
In [Output Device Name], choose “KORG 2ch 1bit Audio Device.”
6
Set [Sample Rate] to “Auto” or to “5.6 MHz” or “2.8 MHz.”