Korg DS-DAC-10R - KORG Audio Driver Control Panel Settings

7
KORG 2ch 1bit Audio Driver Control Panel settings
The Mac version of the control panel does not allow you to directly change the Sample
Rate. You can make these changes via AudioGate or from the Audio MIDI seings of
your Mac.
In the Windows start menu Control Panel, view all control panel items, and click “KORG
2ch 1bit Audio Driver” DS-DAC Audio I/O Driver Control Panel to open it; the following
control panel appears:
Buer Size
Selects the buer size. Moving the slider toward the left decreases the buer size, and
moving it toward the right increases the size.
* Increasing the buer size increases the time dierence (latency) between the direct
sound and the monitored sound, but allows you to record safely without noise oc-
curring.
Normally, including while recording vinyl records, you should leave this at the
maximum seing. Only if you are bothered by latency, such as when making a live
recording, adjust the buer size without allowing noise to occur.
Sampling Rate
Species the sampling rate. Choose from 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4
kHz, 192 kHz. If you’re using the DS-DAC-10R with WDM (WASAPI/Direct Sound),
make the seing here.