Korg Kronos X - Other Disk Operations; Setting the Date and Time

Loading & saving data, and creating CDs
198
Other disk operations
Setting the date and time
KRONOShasaninternalcalendar,whichisusedto
recordthedateandtimewhenyousavedata.Youcan
setthedateandtimebyusingtheDiskUtilitypage’s
SetDate/Timemenucommand.
Youwillneedmakethesesettingsafteryoupurchase
theKRONOS,andafterreplacingthecalendarbackup
batte
ry
.
1. PresstheDISKbuttontoenterDiskmode.
2. SelecttheDisk–Utilitypage.PresstheFiletab,
andthentheUtilitytab.
3. Openthepagemenu,andselecttheSetDate/Time
command.
Thefollowingdialogboxwillappear.
4. UsetheVA LU E controllerstosetthecorrectyear,
month,day,hour,minute,andsecond.
5. PresstheOKbutton.
Ifthecalendarbackupbatteryrunslow,the
followingmessagewillappearintheLCDscreen:
“Theclockbatteryvoltageislow.Pleasereplacethe
battery,andsetthedateandtimeinDiskmode”
Ifthecalendarbackupbatteryrunsdown
completely,thecalendarwillbeinitialized,andthe
dat
e
andtimewillnotberecordedcorrectly.Your
KorgDistributorcanhelpyoufindaservicecenter
toreplacethebattery.