Front Panel
En-6
Front Panel
1. MAIN VOLUME knob
This adjusts the volume of the main L/R audio outputs, as
well as the volume of the headphone jack.
It does not affect any of the other outputs, including S/P DIF,
individual outputs 1-4, or the USB output.
2. Control Surface
The Control Surface is the set of 9 sliders, 8 knobs, and 16
switches to the left of the LCD screen. It looks like a mixer,
but can do a variety of things such as editing sounds,
controlling the KARMA function, and sending MIDI
messages to external devices. You can freely change back
and forth between the different functions without losing any
of your edits. Names and values of the controls are shown on
the Control Surface page.
CONTROL ASSIGN buttons
As explained below, you can use the front panel CONTROL
ASSIGN buttons to switch between the various control
surface functions.
TIMBRE/TRACK
TIMBRE/TRACK lets you use the control surface to adjust
the volume, pan, EQ, and send levels for OSC 1/2 or EXi 1/2
in Program mode (plus similar controls for the Drum Track,
with the exception of pan), the current Multisample in
Sample mode, and each of the 16 Timbres or Tracks in
Combi and Sequence modes.
The LEDs to the right of the switch show whether you’re
currently editing Timbres (or Tracks) 1-8 or 9-16; press the
TIMBRE/TRACK button to toggle between the two.
AUDIO
AUDIO lets you use the control surface to adjust the
volume, play/mute status, solo, pan, and send levels of the
analog, S/P DIF, and USB inputs. In Sequencer mode, you
can also choose to control audio tracks 1–8 (HDR 1-8) or 9–
16 (HDR 9-16).
EXT
EXT (External) lets you use the control surface to transmit
MIDI messages to external MIDI devices.
RT KNOBS/KARMA
RT KNOBS/KARMA lets you modulate sounds and effects
with the knobs, and control KARMA with the sliders and
switches.
TONE ADJ/EQ
TONE ADJ (Tone Adjust) gives you hands-on access to
sound editing, using the sliders, knobs, and switches. In
Combination and Sequence modes, it also lets you edit
Programs within the context of the Combi or Song, without
making any changes to the original Program data.
EQ is available only in Set Lists. This is a nine-band graphic
EQ applied to the sound after TFX2, which tailors the sound
from the main stereo outputs (including the analog L/R
outputs, S/P DIF, and USB).
MIXER KNOBS button
This applies only when CONTROL ASSIGN is set to
TIMBRE/TRACK or AUDIO. It toggles the knobs
between controlling the pan of all channels or controlling the
pan, EQ, and sends of the currently selected channel.
RESET CONTROLS button
This feature lets you reset the Vector Joystick to the center
position, or reset any of the Control Surface sliders, knobs,
or switches to their saved value.
To reset a single control, hold down RESET CONTROLS
and then move a Control Surface slider or knob, press one of
the control surface buttons, or move the Vector Joystick.
To reset all of the sliders, knobs, and switches of the current
CONTROL ASSIGN mode at once, hold down RESET
CONTROLS and then press the currently-lit CONTROL
ASSIGN button again.
You can also reset all of the sliders and switches in the
KARMA Module by holding RESET CONTROLS and then
pressing the KARMA MODULE CONTROL button.
Similarly, to reset a single KARMA Scene, hold RESET
CONTROLS and press any of the SCENE buttons.
9. Vector
Joystick
11. SW 1&2
12. Joystick
13. Ribbon
14. Headphone Jack
1. Volume 2. Control Surface 5. Mode
4. Disk Access Indicator
6. Utility 7. Bank Select
18. Sampling16. Sequencer15. Exit
17. Tempo
3. Data Entry
8. KARMA
10. Drum
Track
19. TouchView
Display
To Next Page
Loading...
