Korg M3

10
Steinberg - Cubase SX4
1
Start up Cubase SX4 and create a project.
2
In the VST Instruments window, start up “M3 Plug-In Editor.”
3
Create a MIDI track. As the output of that MIDI track, choose “M3 Plug-In Editor”
which you started up in the VST Instruments window.
4
To route the M3’s audio signal to Cubase SX4, create an audio track. As the input of the
track, select the audio interface input to which you’ve connected the M3’s audio
signal.
5
Turn the Monitor button on so that you can hear the audio signal.