Korg M3 - Installation in Mac os X

4
Installation in Mac OS X
To install the M3 Editor and M3 Plug-In Editor into Mac OS X, use the following procedure.
You must install the KORG USB-MIDI Driver (included) if you want to connect the M3 to
your computer via USB and use the M3 Editor or M3 Plug-In Editor. (For details on
installing the KORG USB-MIDI Driver, refer to the Operation Guide.)
1
Insert the included CD-ROM into your CD-ROM drive.
2
Start up the installer by double-clicking “M3 Editor Installer.pkg” located in the “M3
Editor” folder of the CD-ROM.
3
Depending on the version of your Mac’s operating system, a confirmation dialog box
may appear at this point. If so, enter your password and click [OK].
When the installer starts up, the following screen will appear. Click [Continue].
4
“Important information” will appear. Read the contents, and click [Continue].
5
The “License agreement” will appear. Carefully read the contents, and click
[Continue].
A dialog box will ask whether you accept the terms of the license agreement. If you
accept, click [Agree].