Korg M3 User Manual

12
MOTU - Digital Performer 5
1
Start up Digital Performer 5
2
Create an instrument track. Start up “M3 Plug-In Editor.”
3
Create a MIDI track. Choose “M3 Plug-In Editor” as the output of that MIDI track.
4
To route the M3’s audio signal to Digital Performer 5, create an audio track or an AUX
track. As the input of that track, select the audio interface input to which you’ve
connected the M3’s audio signal.
5
If you’re routing the M3’s audio signal to an audio track, turn the REC button on so
that you can hear the audio signal.
If you are routing the M3’s audio signal to an AUX track, this step is not necessary.

Korg M3 Specifications

General

Synthesis Type	EDS (Enhanced Definition Synthesis)
Sound Engine	EDS (Enhanced Definition Synthesis)
MIDI	In, Out, Thru
Keyboard	61-key, velocity-sensitive, aftertouch
Sequencer	16-track MIDI sequencer
Sampling	Open Sampling System
Display	TouchView graphical user interface with 320x240 color TFT LCD
Arpeggiator	2 polyphonic arpeggiators
Controllers	Joystick, Ribbon Controller
Outputs	L/MONO, R, Individual 1-4, Headphones
USB	Yes, USB MIDI
Storage	SD card slot
Combinations	1, 792 user combinations
Polyphony	120 voices (max)
Effects	5 Insert effects, 2 Master effects, 1 Total effect