Playing and editing Programs
66
Automatically importing a Program into Sequence mode
The Auto Song Setup feature copies the current
Program or Combination into a Song, and then puts
the OASYS in record-ready mode.
If inspiration for a phrase or song strikes you while
you’re playing, you can use this function to start
recording immediately. To do so:
1. Hold down the ENTER key and press the
SEQUENCER REC/WRITE key.
The Setup to Record dialog box will open and ask “Are
you sure?”
2. Press OK.
You will automatically enter Sequencer mode, and will
be in the record-ready state.
3. Press the START/STOP key to start the sequencer
and begin recording.
To Next Page
Loading...
