En-7
Meter display color settings
You can specify the color of the meter display. ere are ve color combinations to choose from.
1
. Long-press the DISPLAY button.
e POWER ON LED will blink, and the color number appears in the note display.
2
. While the POWER ON LED is blinking, press the DISPLAY button to select the color.
3
. Once you’ve made the setting, wait for about two seconds without pressing any buttons.
e meter display color setting will be made, and you can now use the tuner normally.
Cable check function
When the cable is connected, the cable check function will start and the results will be shown on the
CABLE CHECK LEDs.
CABLE CHECK INPUT 1
Normal: Abnormal:
NOTE:
Cable checking can only be done with mono cables. Stereo cables cannot be checked.
To Next Page
Loading...
