62
Auto Song Setup function
This function automatically applies the settings of the
current combination to a new song.
If inspiration for a phrase or song strikes you while
you’re playing a combination, you can use this func-
tion to start recording immediately.
Hold down the [ENTER] key and press the
SEQUENCER [REC/WRITE] key. The “Setup to
Record” dialog box will open and ask “Are you sure?”.
Press [F8] (“OK”) key. You will automatically enter
Sequencer mode, and will be in the record-ready state.
Press the [START/STOP] key to start the sequencer
and begin recording.
To Next Page
Loading...
